Whichever method you use, the crowning job is critical for accuracy. Brownell's sells crowning tools that can be used without a lathe, but the lathe was handy, so I used it for the crowning job. A flat face was machined and it was crowned with a deep 45-degree taper. I cut off about 4 inches - giving me a 30-inch barrel - and dialed it up in the lathe to face and crown the muzzle. It also took off some of the front weight. I still had to draw-file and sand the barrel, but I liked the resulting look much more than when it had a slight taper from the box. ![]() ![]() 5 carbine in 7mm and went to work.Īfter I fitted the barrel, I wanted to shape and taper it for looks and to reduce the weight.Īfter setting up the mill, I used a facing tool to remove a great deal of material - about 1 pound of metal was shaved off - and to give the barrel a more streamlined shape. Inspired by the great Remington Rolling Block design, the author decided to build a buffalo gun for hunting and shooting cowboy action single-shot long-range events.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |